Flug

flug@lug-freiburg.de

2 participants
608 discussions

Start a nNew thread

[Flug] IRC-Server ?
by walter harms 30 Jan '17

30 Jan '17

Hallo Liste, hat schon mal jemand eine IRC-Server mit Authentifizierung aufgesetzt ? re, wh

2 1

[Flug] Schriftartensammlung
by Webmaster - Internet-Gestaltung 16 Jan '17

16 Jan '17

Hallo, wie kann ich meine Schriftartensammlung (Fonts) von meinem Laptop (LinuxMint) auf meinen neuen PC (Ubuntu Mate) am einfachsten übernehmen? Gruß Mikel

3 3

[Flug] Hilfe zu Xorg
by Oliver Runte 21 Dec '16

21 Dec '16

Stefan Ziegler wrote: > Hallo, > > Während des Treffens gestern habe ich probiert, eine xorg.conf passend zum Monitor zu erstellen. > Blöderweise gibt es bei den neueren Systemen keine Vorlage mehr, wie man die zu gestalten hat. > > Ich hatte dann in etwa folgendes > Section "Monitor" > Identifier "Laptop" > ModelName "Laptopschirm" > VertRefresh "60-72Hz" > EndSection > > Auf der folgenden Seite stehen noch ein paar Tipps, die ich testen kann. > > https://www.freebsd.org/doc/de_DE.ISO8859-1/books/handbook/x-config.html: > Section "Monitor" > Identifier "Monitor0" > HorizSync 30-83 # kHz > VertRefresh 50-76 # Hz > EndSection > > Die standardmäßigen Bereiche sind doch etwas zu großzügig für meinen Laptop-Bildschirm. Wenn der Schirm immer wieder schwarz wird. > > Habt ihr noch Tipps für eine einfache Standardkonfiguration? > > Viele Grüße, Stefan. > _______________________________________________ > Freiburger Linux User Group > Mail an die Liste: flug(a)lug-freiburg.de > Mailingliste verwalten (u.a. abbestellen): http://lug-freiburg.de/mailman/listinfo/flug Hallo Stefan, hier das Beispiel xorg.conf.example von meinem Puppy (Slacko6.3.2). Mann kann die Frequenz unterschiedlich angeben. # File generated by xf86config. # and additional hand edited by Rene Rebe - T2 Project # # YOU MUST ONLY MODIFY THE CARD SECTION AND SOME MONITOR SETTINGS # TO GET A WORKING X CONFIGURATION. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** Section "Module" Load "dbe" # DBE (double buffer extension) Load "ddc" # Display Data Channel extension # This loads the miscellaneous extensions module SubSection "extmod" # Option "omit xfree86-dga" # don't initialise the DGA extension # Option "omit XFree86-VidModeExtension" # disable mode-switching-supoprt EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # Load "glx" # GLX extension (OpenGL visuals) # Load "dri" # Direct Rendering Interface extension (OpenGL) # Load "v4l" # Video 4 Linux extension (provides a xv adapter) EndSection # ********************************************************************** # Extensions section -- this section is used to specify # which extensions to enable. # ********************************************************************** Section "Extensions" # Option "XEVIE" "Disable" Option "Composite" "Enable" EndSection # this enabled normal users to use DRI - the Direct Rendering Extension. # it is also possible to use a group to control access. # Section "DRI" Mode 0666 EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11/share/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11/lib/X11/fonts/CID/" FontPath "/usr/X11/lib/X11/fonts/PEX/" FontPath "/usr/X11/lib/X11/fonts/Speedo/" FontPath "/usr/X11/lib/X11/fonts/Type1/" FontPath "/usr/X11/lib/X11/fonts/cyrillic/" FontPath "/usr/X11/lib/X11/fonts/encodings/" FontPath "/usr/X11/lib/X11/fonts/freefont/" FontPath "/usr/X11/lib/X11/fonts/latin2/" FontPath "/usr/X11/lib/X11/fonts/local/" FontPath "/usr/X11/lib/X11/fonts/misc/" FontPath "/usr/X11/lib/X11/fonts/sharefont/" FontPath "/usr/X11/lib/X11/fonts/TTF/" # The module search path. The default path is shown here. # ModulePath "/usr/X11/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # Uncomment this to enable multi-head Xinerama support # Option "Xinerama" "true" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "250 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xorg" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xorg" Option "XkbModel" "pc105" # Option "XkbLayout" "de" # german keyboard layout # Option "XkbVariant" "nodeadkeys" # normally not wanted EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** # normal wheel mouse ... # Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" # Option "Protocol" "Auto" # Option "Protocol" "Microsoft" # Option "Protocol" "PS/2" # Option "Device" "/dev/tts/0" # Option "Device" "/dev/misc/psaux" Option "Buttons" "5" Option "ZaxisMapping" "4 5" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "Spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "Spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "Synaptics1" # Driver "synaptics" # Option "ZaxisMapping" "4 5 6 7" # Option "Device" "/dev/input/mouse0" # Option "Protocol" "auto-dev" # # Option "LeftEdge" "1700" # # Option "RightEdge" "5300" # # Option "TopEdge" "1700" # # Option "BottomEdge" "4200" # Option "FingerLow" "25" # Option "FingerHigh" "30" # Option "MaxTapTime" "180" # Option "MaxTapMove" "220" # Option "TapButton2" "3" # Option "TapButton3" "2" # Option "VertTwoFingerScroll" "true" # Option "HorizTwoFingerScroll" "true" # Option "VertScrollDelta" "5" # Option "HorizScrollDelta" "5" # Option "MinSpeed" "0.40" # Option "MaxSpeed" "1.00" # Option "AccelFactor" "0.05" # Option "SHMConfig" "on" # EndSection # # Section "InputDevice" # Identifier "Touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "Touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # Section "InputDevice" # Identifier "Tablet1" # Driver "summa" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # Option "BaudRate" "19200" # Option "DataBits" "8" # Option "StopBits" "1" # Option "Parity" "Odd" # Option "FlowControl" "Xoff" # Option "VTime" "10" # Option "VMin" "1" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Monitor1" # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS !! # normally uncomment this lines # HorizSync 24.0 - 80.0 # VertRefresh 50-100 # overwrite the screen dimensions (in mm) e.g. to get another virtual dpi # value # DisplaySize 345 260 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # VertRefresh 50-100 # some mode examples 1,2 selfmade - 3 from fbset # (only needed for low-level tricks, exotic Laptops or other LCD's) # # Mode "1152x900" # DotClock 120 # HTimings 1152 1200 1312 1528 # VTimings 900 910 946 985 # EndMode # Mode "1152x900-2" # DotClock 100 # HTimings 1152 1200 1312 1528 # VTimings 900 910 946 985 # EndMode # Mode "1152x864" # DotClock 105.810 # HTimings 1152 1184 1312 1504 # VTimings 864 868 872 902 # Flags "-HSync" "-VSync" # EndMode # for framebuffer devices you might want to simply add # the 'fbset -x' output here. EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "Card1" # Use this for framebuffer devices - should work on most systems. Driver "fbdev" Option "fbdev" "/dev/fb/0" # Driver "vga" # mga, ati, nv, sis, vesa ... # # Option "BackingStore" # # Some driver accept an UseFBDev option (e.g. radeon) to switch the # # mode via the Linux framebuffer layer. Needed e.g. as workaround for # # iBooks. # # Option "UseFBDev" # # The BuID is only required for multi-monitor configs or some fbdev drivers # # BusID "PCI:1:5:0" # # Screen 0 # Screen of a dual-head mga card # # Option "NoHal" # do not use the binary-only Matrox HAL library # # Option "AGPMode2x" # # Option "MergedFB" "true" # lightweight multi-head # # Option "CRT2Position" "RightOf" EndSection # Matrox Millenium 4xx, Ati or NVidia second-head #Section "Device" # Identifier "Card2" # Driver "mga" # or other dual-able cards like ati, nv # # Option "BackingStore" # BusID "PCI:1:5:0" # Screen 1 # # # Option "NoHal" # do not use the binary-only Matrox HAL library # # Option "AGPMode2x" # # Option "Tv" "yes" # # Option "TVStandard" "PAL" # # Option "CableType" "SCART_COMPOSITE" #EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" DefaultDepth 24 Subsection "Display" Modes "1024x768" "800x600" "640x480" EndSubsection EndSection #Section "Screen" # Identifier "Screen2" # Device "Card2" # Monitor "Monitor1" # DefaultDepth 16 # # Subsection "Display" # Modes "1024x768" "800x600" "640x480" # EndSubsection #EndSection #Section "Screen" # Identifier "ScreenTV" # Device "CardTV" # Monitor "Monitor1" # DefaultDepth 16 # # Subsection "Display" # Depth 16 # Modes "640x480" # ViewPort 0 0 # EndSubsection #EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen1" # LeftOf "Screen2" # Screen "Screen2" # Screen "ScreenTV" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" # It is possible to specify secondary input devices which might not # be pressend on X startup. Nice for laptops with temporary external # mices ;-)! # InputDevice "Mouse2" "SendCoreEvents" # InputDevice "Tablet1" EndSection

2 1

[Flug] Hilfe zu xorg.conf
by Stefan Ziegler 21 Dec '16

21 Dec '16

Hallo, Während des Treffens gestern habe ich probiert, eine xorg.conf passend zum Monitor zu erstellen. Blöderweise gibt es bei den neueren Systemen keine Vorlage mehr, wie man die zu gestalten hat. Ich hatte dann in etwa folgendes Section "Monitor" Identifier "Laptop" ModelName "Laptopschirm" VertRefresh "60-72Hz" EndSection Auf der folgenden Seite stehen noch ein paar Tipps, die ich testen kann. https://www.freebsd.org/doc/de_DE.ISO8859-1/books/handbook/x-config.html: Section "Monitor" Identifier "Monitor0" HorizSync 30-83 # kHz VertRefresh 50-76 # Hz EndSection Die standardmäßigen Bereiche sind doch etwas zu großzügig für meinen Laptop-Bildschirm. Wenn der Schirm immer wieder schwarz wird. Habt ihr noch Tipps für eine einfache Standardkonfiguration? Viele Grüße, Stefan.

2 1

Re: [Flug] Virtueller Server / Webspace gesucht für die FLUG
by Uwe Kleine-König 02 Dec '16

02 Dec '16

Hallo, On 11/29/2016 10:44 PM, Sebastian Inacker wrote: > Am 23.11.2016 um 23:25 schrieb Stefan Ziegler: >> Ich habe nur die Diskussion angestossen. Ich kann und möchte das nicht allein entscheiden. >> Bitte beteiligt euch und schreibt eure Meinung. > > Ich würde vorschlagen, Webseite und Mailingliste zu Uwe umzuziehen. Ich habe das mal in Angriff genommen und die Mailingliste umgezogen. (Dies ist auch eine Testmail für das neue Setup.) Der alte Server von Sebastian ist noch im DNS eingetragen, der Plan ist, das am Wochenende zu ändern. Solange werden sowohl Mails als auch das mailman webinterface auf den neuen Server gebrückt. Wenn was nicht funktioniert, bitte bei mir melden. Liebe Grüße Uwe

1 0

[Flug] test
by uwe＠kleine-koenig.org 01 Dec '16

01 Dec '16

Hallo

1 0

[Flug] tralala
by Uwe Kleine-K�oenig 01 Dec '16

01 Dec '16

test

1 0

[Flug] test
by Uwe Kleine-König 01 Dec '16

01 Dec '16

lala

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

Flug