[Flug] Hilfe zu Xorg

Stefan Ziegler wrote: Hallo Stefan, hier das Beispiel xorg.conf.example von meinem Puppy (Slacko6.3.2). Mann kann die Frequenz unterschiedlich angeben. # File generated by xf86config. # and additional hand edited by Rene Rebe - T2 Project # # YOU MUST ONLY MODIFY THE CARD SECTION AND SOME MONITOR SETTINGS # TO GET A WORKING X CONFIGURATION. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** Section "Module" Load "dbe" # DBE (double buffer extension) Load "ddc" # Display Data Channel extension # This loads the miscellaneous extensions module SubSection "extmod" # Option "omit xfree86-dga" # don't initialise the DGA extension # Option "omit XFree86-VidModeExtension" # disable mode-switching-supoprt EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # Load "glx" # GLX extension (OpenGL visuals) # Load "dri" # Direct Rendering Interface extension (OpenGL) # Load "v4l" # Video 4 Linux extension (provides a xv adapter) EndSection # ********************************************************************** # Extensions section -- this section is used to specify # which extensions to enable. # ********************************************************************** Section "Extensions" # Option "XEVIE" "Disable" Option "Composite" "Enable" EndSection # this enabled normal users to use DRI - the Direct Rendering Extension. # it is also possible to use a group to control access. # Section "DRI" Mode 0666 EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11/share/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11/lib/X11/fonts/CID/" FontPath "/usr/X11/lib/X11/fonts/PEX/" FontPath "/usr/X11/lib/X11/fonts/Speedo/" FontPath "/usr/X11/lib/X11/fonts/Type1/" FontPath "/usr/X11/lib/X11/fonts/cyrillic/" FontPath "/usr/X11/lib/X11/fonts/encodings/" FontPath "/usr/X11/lib/X11/fonts/freefont/" FontPath "/usr/X11/lib/X11/fonts/latin2/" FontPath "/usr/X11/lib/X11/fonts/local/" FontPath "/usr/X11/lib/X11/fonts/misc/" FontPath "/usr/X11/lib/X11/fonts/sharefont/" FontPath "/usr/X11/lib/X11/fonts/TTF/" # The module search path. The default path is shown here. # ModulePath "/usr/X11/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" # Uncomment this to enable multi-head Xinerama support # Option "Xinerama" "true" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "kbd" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "250 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xorg" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xorg" Option "XkbModel" "pc105" # Option "XkbLayout" "de" # german keyboard layout # Option "XkbVariant" "nodeadkeys" # normally not wanted EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** # normal wheel mouse ... # Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" # Option "Protocol" "Auto" # Option "Protocol" "Microsoft" # Option "Protocol" "PS/2" # Option "Device" "/dev/tts/0" # Option "Device" "/dev/misc/psaux" Option "Buttons" "5" Option "ZaxisMapping" "4 5" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "Spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "Spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "Synaptics1" # Driver "synaptics" # Option "ZaxisMapping" "4 5 6 7" # Option "Device" "/dev/input/mouse0" # Option "Protocol" "auto-dev" # # Option "LeftEdge" "1700" # # Option "RightEdge" "5300" # # Option "TopEdge" "1700" # # Option "BottomEdge" "4200" # Option "FingerLow" "25" # Option "FingerHigh" "30" # Option "MaxTapTime" "180" # Option "MaxTapMove" "220" # Option "TapButton2" "3" # Option "TapButton3" "2" # Option "VertTwoFingerScroll" "true" # Option "HorizTwoFingerScroll" "true" # Option "VertScrollDelta" "5" # Option "HorizScrollDelta" "5" # Option "MinSpeed" "0.40" # Option "MaxSpeed" "1.00" # Option "AccelFactor" "0.05" # Option "SHMConfig" "on" # EndSection # # Section "InputDevice" # Identifier "Touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "Touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # Section "InputDevice" # Identifier "Tablet1" # Driver "summa" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # Option "BaudRate" "19200" # Option "DataBits" "8" # Option "StopBits" "1" # Option "Parity" "Odd" # Option "FlowControl" "Xoff" # Option "VTime" "10" # Option "VMin" "1" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Monitor1" # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS !! # normally uncomment this lines # HorizSync 24.0 - 80.0 # VertRefresh 50-100 # overwrite the screen dimensions (in mm) e.g. to get another virtual dpi # value # DisplaySize 345 260 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # VertRefresh 50-100 # some mode examples 1,2 selfmade - 3 from fbset # (only needed for low-level tricks, exotic Laptops or other LCD's) # # Mode "1152x900" # DotClock 120 # HTimings 1152 1200 1312 1528 # VTimings 900 910 946 985 # EndMode # Mode "1152x900-2" # DotClock 100 # HTimings 1152 1200 1312 1528 # VTimings 900 910 946 985 # EndMode # Mode "1152x864" # DotClock 105.810 # HTimings 1152 1184 1312 1504 # VTimings 864 868 872 902 # Flags "-HSync" "-VSync" # EndMode # for framebuffer devices you might want to simply add # the 'fbset -x' output here. EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present Section "Device" Identifier "Card1" # Use this for framebuffer devices - should work on most systems. Driver "fbdev" Option "fbdev" "/dev/fb/0" # Driver "vga" # mga, ati, nv, sis, vesa ... # # Option "BackingStore" # # Some driver accept an UseFBDev option (e.g. radeon) to switch the # # mode via the Linux framebuffer layer. Needed e.g. as workaround for # # iBooks. # # Option "UseFBDev" # # The BuID is only required for multi-monitor configs or some fbdev drivers # # BusID "PCI:1:5:0" # # Screen 0 # Screen of a dual-head mga card # # Option "NoHal" # do not use the binary-only Matrox HAL library # # Option "AGPMode2x" # # Option "MergedFB" "true" # lightweight multi-head # # Option "CRT2Position" "RightOf" EndSection # Matrox Millenium 4xx, Ati or NVidia second-head #Section "Device" # Identifier "Card2" # Driver "mga" # or other dual-able cards like ati, nv # # Option "BackingStore" # BusID "PCI:1:5:0" # Screen 1 # # # Option "NoHal" # do not use the binary-only Matrox HAL library # # Option "AGPMode2x" # # Option "Tv" "yes" # # Option "TVStandard" "PAL" # # Option "CableType" "SCART_COMPOSITE" #EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" DefaultDepth 24 Subsection "Display" Modes "1024x768" "800x600" "640x480" EndSubsection EndSection #Section "Screen" # Identifier "Screen2" # Device "Card2" # Monitor "Monitor1" # DefaultDepth 16 # # Subsection "Display" # Modes "1024x768" "800x600" "640x480" # EndSubsection #EndSection #Section "Screen" # Identifier "ScreenTV" # Device "CardTV" # Monitor "Monitor1" # DefaultDepth 16 # # Subsection "Display" # Depth 16 # Modes "640x480" # ViewPort 0 0 # EndSubsection #EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen1" # LeftOf "Screen2" # Screen "Screen2" # Screen "ScreenTV" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" # It is possible to specify secondary input devices which might not # be pressend on X startup. Nice for laptops with temporary external # mices ;-)! # InputDevice "Mouse2" "SendCoreEvents" # InputDevice "Tablet1" EndSection